Category: News

Expanding the Net Investment Income Tax

3 min read

Net Investment Income TaxDespite borrowing massive amounts of money, the government still needs to find ways to raise revenue to pay for new programs and spending. The current democratically controlled Congress is looking to potentially implement new social programs and a climate bill. As a way of funding these initiatives, they are considering an expansion of the Net Investment Income Tax (NIIT).

The NIIT is proposed to raise revenue since it is seen as politically more palatable, given that it typically only impacts a small group of wealthier taxpayers. Critics, however, say the plan in its current form would also hurt small family businesses.

Who Pays NIIT Now?

Under the Affordable Care Act (ACA), the NIIT applied a 3.8 percent tax on investment income. Investment income includes both passive sources like dividends, capital gains, interest, royalties, and rents as well as passive business income. Under the ACA, the NIIT applied only to single taxpayers earning $200k or more and joint filers with $250k or more.

When it comes to the taxability of business income under the NIIT, because the law only captures passive business income, most owners of pass-through entities must pay the NIIT; however, active owners of S-corporations are exempt. Likewise, if someone qualifies as a real estate professional, their income is considered active and so their rental income is also exempt.

Who Would Pay Under the New Proposed Law?

The current version of the House bill makes two major changes. First, the NIIT expands to capture all business income. Essentially, S-corporation shareholders, limited partners, and pass-through entity owners that are currently exempt would be impacted.

Second, when it comes to removing the exemption on this business income, the income threshold rises from $200k to $400k for single filers and from $250k to $500k for taxpayers filing jointly. The effect of this would be to exclude most business owners from the tax, but make filing more complex for those impacted.

Under the new rules, the Tax Policy Center projects that in 2023 the tax hike would fall on those in the top 1 percent of household incomes or those making approximately $885k or more. Further, even among the top 1 percent, more than 50 percent of the tax increase would be borne by the top 0.1 percent for those making $4 million and up.

Impact No Small Businesses

Overall, about 14 percent of taxpayers report some form of business income on their federal tax returns. The amount reported, however, is usually not a material amount for most as a percentage of their income. For example, only approximately 5.5 percent of taxpayers with reported business income had this as the source of 50 percent or more of their total income. As a result, the impact will be mostly on a small percentage of small businesses. At the same time, as business income is far more variable than employment income, someone could easily fall in and out of the tax range.

Conclusion

Overall, the House bill looks to raise the threshold of where the NIIT expansion applies by the type of income it captures. We will have to wait and see if there are changes as the bill makes its way through – if it even passes at all. No matter what happens, there will certainly be tax increases of some kind.

How Businesses Can Mitigate Inflation & Maintain Pricing Power

5 min read

Mitigate Inflation, Maintain PricingWhether it’s tariffs, trade wars, or post-pandemic inflation caused by kink-ridden supply chains and what many experts believe to be excess money printing, inflation is an insidious drag on businesses’ operations. When it comes to energy’s contribution to inflation, the U.S. Energy Information Administration (EIA) reports that crude and natural gas prices in 2022 have increased on an annualized and weekly basis. Looking at the snapshot of 7/21/2022, WTI crude on the futures market was $96.35 a barrel. This was up more than $26 compared to 12 months ago, and $0.57 higher than a week earlier. For the same time frame, natural gas futures were $7.932/MMBtu, an increase of $3.973 from 12 months ago and an increase of $1.332 from a week earlier.

When it comes to businesses using any type of commodity, they’re faced with the question of how to raise retail prices when their prices increase. However, many business owners are hesitant to increase prices on their goods and services as they fear it will drive away customers. But in light of increasing input prices, not implementing price increases correctly will impact a business’s earnings and profitability.

As McKinsey & Company explains, there are many considerations why businesses have had trouble with mitigating costs in light of rising input costs. It’s important to monitor raw material costs with a fine-tooth comb. Businesses that bury costs of commodities, labor or tariffs under general accounting categories hide spikes in input costs due to factoring ancillary costs. If volatile input or uncontrollable factors, however, like tariffs can be monitored independently and in real time, businesses are more likely to be able to increase prices – and do so more gradually. With this in mind, McKinsey & Company highlighted four practices that businesses can implement to combat pressure from input costs and pushback from customers who question the reason for price increases.

1. Create a Database of Dynamic Costs

By looking at historical records going back as far as 36 months, businesses can determine trends and keep track of increases or decreases of input materials to share with the sales and customer service department, who can then communicate with customers. Along with looking at how contracts are written and if there are escalator clauses that permit conditions to adjust for increases in input materials, taking steps to accurately measure the impact of raw material costs can be helpful for price increase considerations.

It could look at costs by department. If a plating department at a manufacturing company plates 50,000 pieces of metal a month, incurs $200,000 of direct material costs and has $50,000 in labor and overhead costs, it can be broken down into a per unit cost of $4 for materials and $1 of labor and overhead costs. If the per unit cost of materials fluctuates, investigation can occur through the supply chain from the supplier to the price of futures contracts to see if prices can be negotiated or must be increased for customers.

2. Mind the Economy

Businesses are advised to keep an eye on current economic conditions. This is how companies can set a dynamic pricing strategy. Building on the first step, it’s advised to index prices to those of commodities to reduce the lag time between when companies experience changes in costs for their input materials and when retail prices actually reflect the true cost to the company. Be it fuel, wood, coffee or metals, understanding how the price of commodities fluctuates in real time is essential to determine when and how to adjust prices for retail customers. It also can help businesses determine how competitors are adjusting their pricing to customers, how far prices could increase, and how to augment delivery of goods or services to stay competitive and profitable.  

In addition to escalation clauses, companies adapting to changing input material prices could, for example, introduce shorter-term contracts, look for more competitive suppliers, or substitute different but equal quality/performance materials.

3. Coaching Staff to Educate and Explain Price Fluctuations

Continual evaluations for sales teams are imperative. Supervisors must see what accounts have (and have not) been informed of price increases. They should focus on what accounts have accepted price increases (and what level of price increases have been accepted). They also should look at what accounts are likely to accept price increases and what accounts are not likely to accept price increases. Businesses also must factor in the business cycle for the sales process and how each account is performing relative to its price increase targets due to cyclical increases in input commodity prices and interest rates for financing availability. Ongoing coaching should be implemented to identify major issues and ways to resolve them. Anticipating and preparing sales representatives for customer questions through role playing can help better prepare employees to explain why price increases are a part of doing business.

4. Managing Performance

Businesses must play the long game after products or services have been priced accordingly to commodity and input prices. Since inflation follows the economic cycle, upside and downside pricing dynamics can catch companies off guard. Consistently updated product or service pricing systems and prepared sales teams can lead to more profitable margins and hopefully the ability to weather volatile and long-term price spikes.

Much like the price of commodities and labor fluctuate based on dynamic market conditions, finding ways to adapt one’s business practices can increase chances of surviving and thriving in a challenging economy.

Sources

https://www.bls.gov/news.release/ppi.nr0.htm

https://www.eia.gov/

https://www.mckinsey.com/business-functions/growth-marketing-and-sales/our-insights/defying-cost-volatility-a-strategic-pricing-response

What Are NFTs and How Can Businesses Benefit?

4 min read

What is an NFTNon-fungible tokens (NFTs) are rising in demand, and some brands are already generating great results in their campaigns and providing a unique experience to customers. As the hype around NFTs continues, businesses need to understand how they can benefit.

What is an NFT?

An NFT is a valuable digital asset created using blockchain. Unlike cryptocurrencies, NFTs are not mutually interchangeable as each NFT represents a different asset with a different value. Hence, an NFT verifies the authenticity of a non-fungible asset. This means that the purchaser of the asset/product can only use a product. Unlike other digital products, an NFT can’t be duplicated and sold. This is because the non-fungible asset is made into a token with a digital certificate of ownership, creating authenticity and credibility. NFTs could include videos, music, physical products, services, documents, artwork, and even memes.

A non-fungible asset’s value depends on various factors, such as underlying value, ownership history, perception of the buyer, future value, etc.

How NFTs Have Been Used

So far, some industries are already reaping benefits from NFTs. Various cases of NFTs can be found in gaming, music, fashion, sports, and virtual real estate.

The growth of NFTs has been attributed to the fact that humans like to collect things, and since NFTs are designed to be scarce digital assets, this contributes to the high prices. According to research conducted in March 2021 by Morning Consult, a global decision intelligence company, about half of the people who identified themselves as avid physical collectors were interested in NFTs. In addition, users have more control over the asset bought because it cannot be used in any other way or duplicated, making it more valuable.

It might not be obvious to most when NFTs are worth an investment. However, looking at NFTs that have already been sold, this can present an opportunity that businesses should not ignore. For instance, the first tweet by Twitter CEO Jack Dorsey was sold for over $2.9 million in March 2022. The Nike brand also has been making headlines with its virtual sneakers, with one selling at $134,000.

With such news making the headlines, businesses may wonder how they can benefit from NFTs. 

How Can a Business Benefit from NFTs?

Businesses still hesitant about adopting new technologies should start considering creating NFTs that align with their brand image. Below are some ways in which a business can benefit:

1. Brand Visibility

Aside from digital marketing, NFTs provide another way businesses and corporations can drive attention to their brand. For instance, by creating a digital version of your products, you expose it to NFT enthusiasts, some of who might not be aware of your products. NFTs also can be incorporated as part of your brand storytelling, creating unique experiences for your customers, consequently increasing consumer engagements.

2. Authenticity

Many businesses undergo massive losses of revenue due to counterfeit products. With NFTs, businesses can ascertain the authenticity of their products and services. A digital certificate is issued with every transaction and a record is kept on the blockchain. A customer can check the authenticity since the blockchain can be traced to the original seller.

3. Additional Revenue Stream

Businesses can use NFTs as an additional source of income by selling digital forms of their products or services. One way to do this is by creating an early access opportunity before the official product launches, creating a buzz and ensuring the NFT value will rise.

4. Customer Loyalty Program

The versatile nature of NFTs makes them ideal for use in loyalty programs. The tokens can be used as medals for loyal clients or as membership tokens.

5. Prevent Ticket Scams

Many people fall victim to online ticket scams where they buy fake discounted tickets or duplicate tickets of an original event ticket. The money collected doesn’t go to the business, which also affects the event organizers. Customers also risk their credit card information being stolen by scammers. However, turning a ticket into an NFT makes it easy to verify its authenticity and even prevent ticket black markets.

6. Managing Supply Chain

NFTs are positively disrupting the supply chain. By the use of blockchain technology, it’s now easy to trace the entire process of a product lifecycle, from raw material, transportation, manufacturing, and distribution up to the end consumer. Hence, businesses interested in improving transparency and accountability can embrace NFTs to automate their supply chain.

Conclusion

NFT technology is relatively new, and its practical use is still limited. However, the fact that people are willing to spend on them is reason enough why any business should consider leveraging NFTs in its marketing strategies to help boost brand engagement and drive sales. 

Building Wealth Through Home Equity

5 min read

Building Wealth Through Home EquityOften the first house a person buys is an affordable condominium, townhouse or older single-family dwelling, also referred to as a “starter home.” It might be small and lack features they dream about, from new appliances in the kitchen, to dual sinks in the bath, to a large yard or a garage.

However, the key to a starter home is not to acquire your dream house, it is to build equity that you can eventually deploy to buy your dream home. It’s important not to wait until you have enough money for the ideal property. Start as early as you can and buy something affordable to get your foot in the door of homeownership.

Interest Rates and Maintenance Expenses

Buying a home when mortgage interest rates are low offers a key advantage for building wealth because it reduces your loan payment, thereby freeing up more discretionary income to put toward other investments, home upgrades or pay down the mortgage balance.

When deciding your price range for purchasing a home, it’s also important to budget common maintenance costs, such as utilities, repairs and upgrades, as well as homeowner’s insurance and property taxes. These costs can be substantial, yet many new homebuyers do not account for them in their budget. They only take into consideration whether or not they can afford the monthly mortgage. It is always a good idea to have a lower payment that you can well afford in order to avoid relying on savings or credit to pay for maintenance expenses as they arise. And remember, maintenance of your property is critical because it can help improve your sale price when you move, which is key to building wealth.

Building Home Equity

The next step to building wealth through homeownership is to sell for a substantial profit. Home equity, which is the market price for which you can sell the home minus your remaining mortgage balance, is achieved in two ways. One way to build equity relies on the real estate market. Over time, houses generally increase in price, so most people are able to sell their home for more than they paid for it. How quickly home prices rise will depend on the overall economy and your home’s particular appeal. That’s why it’s important to make an attractive location one of your top requirements. For example, even if you don’t have children or want children, buying a home in a sought-after school district will likely increase the value of your home faster. Other location features include easy access to shopping districts, major highways and even an airport.

The second way to build equity is through the monthly payments you make on the mortgage, which reduce the balance owed. If you can afford it, adding more to your monthly payment and directing the excess toward your principal balance helps build home equity faster. Another payment option that can help build equity faster is to apply for a shorter-term loan than the standard 30-year mortgage. For example, a 15-year term mortgage features a lower interest rate and the borrower pays off the loan in half the time. Note that monthly payments will be higher, but a homeowner can save thousands of dollars in interest with a shorter-term loan.

Transaction Costs

The garden variety advice is to remain in your home for at least five years. That’s because selling your home and buying a new one involves substantial transaction expenses, from closing costs to initiating a new loan, as well as paying commission fees to both the seller’s and buyer’s real estate agents (usually 3 percent each). Therefore, you need to have lived in the property long enough to build equity through payments and market appreciation to offset these expenses and still make a profit.

Sales Tax

Be aware that it is advantageous to live in your primary residence for at least two years before you sell. Otherwise, your sales profit could be subject to capital gains taxes on the first $250,000 for single tax filers, and as much as $500,000 for married filing jointly. The tax rate is the same as your ordinary income tax rate if you owned property for less than one year; after that, the capital gains rate is based on your tax bracket (15 percent or 20 percent).

Trade Up, Then Down

Over many decades, you can build wealth by buying a home and then periodically “trading up” once you attain substantial equity. The tactic of trading up means you invest your profits in a more expensive home and then begin building equity again. One way to save for retirement is to keep trading up until you retire, then downsize to a less expensive home with lower maintenance expenses. At that point, you can redeploy the profit derived from the home equity you have accumulated into a stream of retirement income.

Today’s Market

In recent years, high prices and low inventory in the residential real estate market have made it harder for young adults to buy a starter home. For those currently shut out, keep saving until the market stabilizes, because the higher your down payment, the lower your monthly payments will be – and the more equity you’ll have in your home. You can still build wealth through homeownership, even if you start late.

How to Drive and Get the Best Fuel Efficiency

4 min read

How to Get the Best Fuel EfficiencyWe’re all feeling the pain at the pump. Unless you decide to walk, bike or take public transportation, you might feel stuck. But all is not lost. Here are some fuel-efficient driving techniques that can help you save hundreds of dollars in fuel each year.

Don’t Drive Too Fast

Of course, when you’re on the highway, you must maintain a certain speed. However, cars, vans and pickups are typically the most fuel-efficient when driving between 50 and 80 mph. If you go any faster, you’ll use more gas. Consider this: When you’re driving roughly 75 miles per hour, you use 20 percent more fuel than you would if you were going around 60 mph. On a 15-mile trip, if you’re driving faster, you’ll only save two minutes. Only you know if shaving two minutes and gulping extra gas from your tank is worth it.

Maintain a Steady Speed

When you drive in bursts, slowing down and then accelerating, your fuel consumption increases. Specifically, tests have shown that varying your speed up and down between 75 and 85 mph every 18 seconds can bump up fuel usage by 20 percent. If your car has cruise control, use that. Word from the wise: Slow and steady wins the race.

Accelerate Gently

The heavier your foot is when putting the pedal to the metal, the more gas you use. Here’s how to accelerate and save gas: From a stop, take five seconds to get to 12 mph. You’ll speed on up after that, but the point is to pay attention to when you’re just starting and ease into your journey.

Coast to Decelerate

If you tend to have a heavy brake foot, you’re thwarting your forward momentum. Granted, you want to control your car if you’re in rain or snow. But here’s the trick: Look ahead to see what traffic is like and, if you have some room when you’re headed down that hill, take your foot off the gas and the brake, and enjoy the ride – you’ll conserve fuel and save money.

Try Not to Idle

Except when you’re in traffic, if you’re stopped longer than a minute, turn off your engine. The average vehicle with a three-liter engine drinks in over a cup of fuel for every 10 minutes it idles. Ouch!

Measure Tire Pressure

Do this every month. If your tires are under-inflated by 56 kilopascals (aka 8 pounds per square inch), fuel consumption rises by up to 4 percent. If you don’t know the right tire pressure for your car, look on the edge of the driver’s side door. If your tires are low, it also can reduce the life of them. Make it a habit to check your tires.

Use Credit Cards with Gas Rewards

These cards are usually issued in partnership with a bank and offer a discount on gas, like saving five or six cents off a gallon. Yes, mere pennies; but when you add it up, it makes a difference. A few of the top cards to check out are Citi Custom CashSM Card, Blue Cash Preferred® Card from American Express, and Discover it® Cash Back. Here are a few more. Another smart way to save is to get an app like GasBuddy that shows you the cheapest gas near you.

No one knows when gas prices will go down. In the meantime, the only thing you can do is try to work around the situation as best you can. The good news is that nothing lasts forever.

Sources

https://www.nrcan.gc.ca/energy-efficiency/transportation-alternative-fuels/personal-vehicles/fuel-efficient-driving-techniques/21038

https://money.com/people-combatting-high-gas-prices/

The IRS is Auditing Fewer Returns than Ever

3 min read

IRS is AuditingOne of the perennial fears of taxpayers is getting audited by the IRS. Financially, few scenarios strike such fear into the heart of taxpayers. However, taxpayers can probably breathe a sigh of relief – at least for now. This is because the rate at which the IRS is initiating audits of individual taxpayers is dropping like a stone.

Decline in Audit Rates

The rate at which the IRS is auditing individual taxpayers has declined overall between the years of 2010 and 2019 (2020 data is too new and 2021 returns are still being filed through the extension period). According to the Government Accountability Office (GAO), nearly 1 percent of all taxpayers were audited in 2010 compared to only 0.25 percent for the tax year 2019. The GAO chart below shows the ski slope-like drop in individual tax audit rates over the period.

IRS is Auditing

Table #3 from the GAO Report

While the IRS continues to audit higher earning taxpayers more often overall, during the 10-year period audit rates consistently declined for all levels of taxpayers, except those with the highest incomes. The audit rate for taxpayers with income between $200k and $500k experienced the largest drop, with the audit rate declining from 2.3 percent down to 0.2 percent; a 92 percent reduction in audits. Taxpayers with the highest incomes, defined as $10 million or more, saw a resurgence in audit rates from 2017-2018; however, even they experienced an overall decline, dropping from 21.2 percent in 2019 to only 3.9 percent in 2019 – equating to an 81 percent decline.

Impact on the Treasury

There is the theory that the prospect of a tax audit leads to greater voluntary compliance. In other words, if people think they won’t get audited, then they are more likely to cheat on their taxes.

Non-compliance with tax laws and regulations have a material impact on the Treasury. According to the IRS, it is estimated that on average, individual taxpayers under-reported nearly $250 billion a year for the period 2011-2013. This obviously leads to the non-collection of taxes that are otherwise owed the government and raises issues of fairness for taxpayers who are playing by the rules.

Why the Decline in Audit Rates?

One of the main drivers is a lack of resources at the IRS, a combination of both reduced funding and less auditors on staff. The number of agents working for the IRS has declined across the board since 2011. Tax examiners, the type who handle basic audits by mail, have dropped by 18 percent. Meanwhile, revenue agents, who handle the more complex cases in the field, declined by more than 40 percent over the same period.

Demographics point to an increase in these trends as there are a wave of coming retirements in the IRS. Over the next three years, nearly 14 percent of current tax examiners and 16 percent of revenue agents are expected to retire. Stack on top of this the fact that the inexperience of newer agents and the time to complete audits is also taking longer.

Conclusion

The IRS claims it is missing out on millions in legally due tax revenues due to the inability to maintain enforcement. They say they need more funding to hire more agents to perform more audits, which not only find fraud in the audits themselves but also increase overall compliance due to the pressure this creates.

Currently, there is no political focus on bringing major new resources to the IRS, so it’s not likely to see an uptick in individual tax audit rates anytime soon. The trend of focusing on the highest earners, however, will likely continue as this is where the IRS can find the most bang for its buck.

Measuring the Margins

5 min read

Operating Margin DefinedCorporate profits, according to the Bureau of Economic Analysis, grew by $20.4 billion in the final quarter of 2021, a 0.7 percent increase. For the first quarter of 2022, corporate profits fell by 2.3 percent or $66.4 billion. On an annualized basis, corporate profits fell 5.2 percent in 2022, but grew 25 percent in 2021. With the economy facing inflation, the uncertainty of the Russia/Ukraine conflict, and the world working its way out of the COVID-19 pandemic, economic uncertainty abounds. For companies, measuring margins is one way to evaluate performance and strategize ways to survive and thrive in a dynamic economy. Here are a few common margins that businesses can determine to measure their financial performance.

Operating Margin Defined

Also referred to as return on sales, this measures the profit a business makes on a percentage basis, per dollar, from its core operations. It accounts for manufacturing costs that fluctuate, such as paying employees and input stock. The operating margin is determined by obtaining the business’ earnings before interest and taxes (EBIT) and dividing it by its net sales or sales revenue.

Operating Margin = Operating Earnings (EBIT) / Revenue

Operating Earnings = Revenue – (cost of goods sold (COGS) + overhead expenses, except tax and loan servicing costs)

Assuming a business had $10 million in revenue, $1.5 million of COGS and $750,000 in related overhead expenses, it would be as follows:

Operating Earnings = $10 million – ($1.5 million + $750,000) / $10 million

Operating Earnings = $10 million – ($2.25 million) / $10 million

Operating Earnings = $7.75 million / $10 million = 0.775 or 77.5%

Understanding the Operating Margin

This doesn’t factor in things such as taxes, interest on loans or other non-core business expenses. However, it gives a picture of what’s remaining for its non-core operating expenses, such as servicing outstanding loans. By looking at a company’s past operating margins, the trends can determine a company’s performance. Ways to improve the margin include reducing staff redundancy, negotiating better deals on raw materials or reaching more receptive customers.

Marginal Revenue Product (MRP)

If a piece of equipment or employee can create an output of X (the marginal physical product or MPP) and each additional unit of production sells at Z price (marginal revenue or MR), the MRP of the piece of the new investment is MPP x MR. Accepting that all other costs remain constant, if the business owner pays less than or equal to the MRP, it may be profitable. Otherwise, it’s not a good decision.

Using the example of a furniture manufacturer looking to respond to increased demand, this illustrates how it can guide business decisions. If a new employee can produce 100 tables every week that will retail for $100 per table, this is the MPP. Based on the calculation, the MPP of 100 multiplied by the marginal revenue (MR) of $100 = $10,000. If the business can hire and retain a new employee for less than $10,000 per week to increase their production by 100 tables per week, it can signal a positive investment.

Marginal Cost of Production

This metric is a way for businesses to determine efficient manufacturing costs. Looking at production volume, this calculation can determine if adding an additional unit to production would add profitability by examining fixed and variable costs. Fixed costs don’t change with modifications in production levels.

A static or fixed cost can be spread out over more units of increased production. However, if expanding production capacity requires additional fixed costs, it can add to the marginal cost of production, which will be explained shortly. When it comes to variable costs, as the name implies, as more production occurs, the costs similarly vary.

Assume company A makes widgets with $1 in variable costs and fixed costs of $10,000 per month, producing 5,000 widgets monthly. This would lead to $2 in fixed costs ($10,000 in fixed costs/5,000 widgets).

This final cost per widget comes to $3 ($2 fixed + $1 variable cost).

If company A chose to produce 10,000 widgets a month and they could use existing machinery, employees, etc., their fixed costs would drop to $1 ($10,000 in fixed costs/10,000 widgets).

Assuming the same variable cost of $1 per widget, plus the $1 in fixed costs, it would cost $2 per widget if the 10,000 widgets were produced. However, if additional investments (equipment, etc.) were needed to produce widget 5,001 to 10,000, this consideration would need to be factored in the marginal cost of production. If additional equipment costs $1,000 to increase production, the business would need to factor this in to see if it’s still profitable.

Essentially, if this additional production cost is less than the price of an additional individual unit, there’s the potential for a profit for the business.

Contribution Margin After Marketing (CMAM)

This measures how much cash is earned from a single unit sold after accounting for promotional and variable expenses. Example expenses include input stock, freight, inventory, etc. It’s important to distinguish between pre-planned marketing expenses over a set period of time (per month, quarter, etc.), and variable sales commissions that can fluctuate. CMAM is calculated as follows:

Contribution Margin After Marketing = Sales Revenue – Variable Costs – Marketing Expense

Looking at how much each unit can add to a business’ profitability:

CMAM for every Unit = Sales Revenue for every Unit – Variable Expenses for every Unit – Marketing Expense for every Unit

From there, a business’ net profit or loss can be found using this ratio:

Net Operating Profit = CMAM – Fixed Costs

Considerations

A smaller or negative CMAM is indicative of a product that’s likely uncompetitive. Conversely, a high CMAM, especially over a long time, can indicate the product is well regarded. It can help businesses to determine their most profitable products and/or what products to discontinue, etc.   

With economic uncertainty expected to continue, keeping an eye on past, present and future margins is a key way to maintain a business’ chance of thriving in 2022 and beyond.

Sources

https://www.bea.gov/data/income-saving/corporate-profits

Big Data Storage: What You Need to Know

4 min read

Big Data Storage: What You Need to KnowToday, businesses have to grapple with vast amounts of data from different sources, including emails, mailing lists, customer orders, system logs, mobile apps, social media networks, etc. This data is crucial to businesses in various ways. When analyzed, a business can identify operational issues, personalize the customer experience and manage supply chains – all contributing to better decision-making.

However, big data also has challenges, especially regarding its storage due to size and other factors such as collection speed, processing, retrieval and format. This becomes more complicated as the data keeps growing with time and cannot be stored in traditional storage devices, necessitating a need for facilities that store and process the data efficiently.

Depending on the business type, a choice can be made between storing data in a warehouse or in the cloud. A data warehouse is a building facility that stores and processes data for a business. This in-house data storage offers the advantage of speed. However, when more space is needed, it will be necessary to acquire more physical storage.

On the other hand, a business may choose to opt for cloud storage. Cloud storage offers the benefit of convenience, accessibility, cost and maintenance, which the service provider handles.

Considerations in Storing Big Data

Regardless of the means a business chooses to store its data, there are various issues to consider:

  • Understand your data – before choosing a data storage method, it is essential to first understand the company’s data in terms of the type of data collected, quantity, storage period, retrieval speeds, use cases, etc. This helps choose a data management system that can handle the data efficiently.
  • Data governance – with so much data collected and with data growing exponentially, it is likely that users can be lost in a sea of data. Therefore, a business should define a strategy that aligns with business goals to avoid collecting unnecessary data that takes up storage space.
  • Data integration tools – data is collected from multiple sources, and it is necessary to have adequate integration tools that allow for different file formats.
  • Cost – it is difficult to determine the actual cost of storing data. Hence, a business should not base the cost decision on the upfront cost alone. This is because other factors are involved, including operating costs, the need for scalability, training or hiring users, new technologies, and the cost of backup. Businesses must evaluate whether the initial investment in the best data storage technologies is worthwhile by looking at the potential long-term results.
  • The data storage provider – before settling on a service provider, thorough research should be conducted. Some considerations when choosing from a variety of providers should include the availability of technical support to solve problems quickly, scalability, fault tolerance, pricing models, and reviews from existing customers.
  • Disaster recovery plan – ensure it is possible to recover data quickly. This is crucial with attacks that deny access to data without paying a ransom. A business should consider keeping secure offsite backups.
  • Enhanced security is required – the expanding IoT network adds to the number of endpoints and devices storing or retrieving data. Therefore, big data comes with a huge responsibility to preserve data in an environment where hackers are pervasive and never stop coming up with new ways to break into systems. It is recommended to choose the safest option even when it costs more, as data security is vital for the survival of any business.
  • Employee training – big data may require a business to hire new staff to help in analytics, such as data scientists. Regardless, a business should consider training existing employees on handling big data and using new tools that will be introduced. Big data also requires collaboration among different departments in an organization. Data-literate employees can better interpret data, ask the right questions, and generally make data-driven decisions.

Compliance with data security regulations – this especially applies to highly regulated industries such as finance or health. It is essential to ensure that even when outsourcing data storage and management, the service provider adheres to compliance regulations to avoid heavy fines that come with a violation. 

Protecting SCOTUS, Veterans in Special Circumstances, Disaster Victims, Potential Firearm Victims, and America’s Water Resources

4 min read

America's Water ResourcesSupreme Court Police Parity Act of 2022 (S 4160) – In response to potential threats and protests outside the homes of Supreme Court judges following a leak of their preliminary judgement on a case related to Roe vs. Wade, this bill authorizes extra security for the justices and their families. Specifically, Supreme Court justices and their families would be provided with security detail similar to that of other top government officials and families in the executive branch (e.g., the president and vice president) and legislative branch (e.g., Speaker of the House and Senate Majority Leader). This type of detail generally cannot be declined. The bill was introduced by Sen. John Cornyn (R-TX) on May 5. It passed in both the Senate and the House on June 14 and was signed into law by the president on June 16.

Honoring our PACT Act of 2021 (HR 3967) – Introduced by Rep. Mark Takano (D-CA) on June 17, 2021, this bill recently passed in both the House and the Senate, but was returned with changes to the House on June 16. PACT is an acronym for Promise to Address Comprehensive Toxins Act. The bipartisan legislation, with 100 sponsors, would permit veterans who were exposed to burn pit smoke and other environmental hazards that caused cancers and other illnesses during their service, to receive health coverage for those ailments.

Air America Act of 2022 (S 407) – Air America was a government-owned airline deployed between 1950 and 1976 for the purpose of conducting certain covert operations in Southeast Asia during the Vietnam War. This bill is designed to restore benefits to the employees who worked for Air America during that period. Benefit applications must be filed within two years of the bill’s enactment. This legislation was introduced on Feb. 24, 2021, by Sen. Marco Rubio (R-FL). It passed in the Senate on June 14 and is currently in the House for consideration.

Post-Disaster Assistance Online Accountability Act (HR 2020) – Introduced by Jenniffer González-Colón, Resident Commissioner for Puerto Rico (R-PR) on March 18, 2021, this bill establishes a centralized website to publish information on disaster assistance. The Small Business Administration, the Department of Housing and Urban Development and other federal agencies that provide disaster assistance must submit the following information for publication on a quarterly basis: 1) the total amount of assistance provided by the agency; 2) the amount provided that was disbursed or obligated; and 3) a detailed list of all projects and activities to which assistance was allocated. The bill passed in the House on May 13 and is under consideration in the Senate.

Protecting Our Kids Act (HR 7910) – The bill was introduced by Rep. Jerry Nadler (D-NY) on May 31 and passed in the House on June 8. The purpose of this legislation is to ban the sale or transfer of certain semiautomatic firearms to anyone under age 21; establish new federal criminal offenses for gun trafficking; regulate guns that do not have serial numbers (ghost guns); regulate the storage of firearms on residential premises at federal, state and tribal levels; regulate bump stocks under federal firearms laws; and generally prohibit the import, sale, manufacture, transfer and possession of large capacity ammunition feeding devices. The bill is currently facing significant challenges in the Senate, where a bipartisan committee is working on an alternative.

Water Resources Development Act of 2022 (HR 1766) – This legislation authorizes the U.S. Army Corps of Engineers to implement projects associated with water resources development, including water supply and wastewater infrastructure, flood control, navigation and ecosystem/ shoreline restoration. The Act was introduced by Rep. Peter DeFazio (D-OR) on May 16. It passed in the House on June 8 and is currently under consideration in the Senate along with other similar bills.

How Social Security Benefits Are Affected by Earned Income

4 min read

How Social Security Benefits Are Affected by Earned IncomeThanks to the Great Resignation trend over the past year, there is a high availability of jobs. Therefore, now is a good time for retirees who would like to go back to work to ease into the job market. However, if you’ve already begun drawing Social Security benefits, you should understand how earning income will affect those payouts.

First of all, you have two options if you’d like to stop receiving Social Security. One option is available only if you’ve been drawing benefits for a year or less. In this case, you may cancel your application; but be aware that you must repay all the benefits that you and your family have received to date. That includes spousal benefits and even Medicare premiums that were deducted from your payout. You will still be able to reapply for Social Security later.

The second option is available only if you have reached full retirement age but have not yet turned 70 years old. In this case, you may request to have your Social Security payouts suspended.

There are two benefits associated with these strategies: 1) foregoing Social Security income will likely reduce your tax bill; and 2) your Social Security benefits will start accruing again based on the delay and calculations that include your new wages.

However, you may continue receiving Social Security while you work, which could be important if your spouse is receiving benefits based on your earnings record. Under this scenario, a portion of your benefit may be withheld or even subject to higher taxes. It all depends on how much you earn. If your annual income is $19,560 or less (2022), it won’t impact your Social Security benefits.

Note that only wages from a job or self-employment count toward your Social Security income limit for withholding purposes. Distributions you receive from pensions, annuities, investment income, interest, veterans benefits or other government or military retirement benefits are not considered earned income.

Once your income totals more than $19,560, the impact depends on your age. If you have not yet reached “full retirement age,” Social Security will withhold $1 in benefits for every $2 you earn over the limit.

During the year you reach full retirement age, your annual total earnings limit increases to $51,960 (2022), and the subsequent benefit reduction drops to $1 for every $3 you earn over that amount. In fact, they count only how much you’ve earned up to the month before your birthday – not what you end up earning in a whole year. Once you’ve reached full retirement age, it doesn’t matter much how you earn, there will no longer be any withholding of benefits.

Better yet, starting in January of the year after you turn full retirement age, regardless of whether you continue working or not, your Social Security benefit will increase to reflect any previously withheld benefits due to your income exceeding the limit. And if the years you subsequently worked rank among your 35 highest earning years, your payout will increase even more to reflect a higher benefit calculation (since you paid FICA taxes on that income).

Tax Considerations

In the case of all beneficiaries, at least 15 percent of Social Security income is exempt from federal income taxes. Be aware though, that for tax purposes, your reportable income includes half of your Social Security benefit plus all other forms of income, such as a job, pension or investment income. If your total annual income is between $25,000 and $34,000, then as much as 50 percent of your Social Security benefit is taxable. If you earn more than $34,000 in a year, then up to 85 percent of your Social Security benefit is subject to taxes.

This is a general overview of what happens to your Social Security benefits when mixed with earned income. There are additional details, so it’s a good idea to work with a Social Security expert to decide if you should cancel or suspend payouts, and to understand how your income and tax situation may be impacted by going back to work.

With that said, if your portfolio has taken a beating this year, you might want to stop investment distributions for now and give it time to grow. Fortunately, the United States is currently enjoying a robust job market in which highly experienced candidates can negotiate a flexible work schedule, job site and higher salary, so it may be worth it to go back to work for another year or two to help secure your long-term retirement plans.